Click here to view brochure	Click here to view photo

A quick and easy to use space saving clamping system for frame and door assembly that allows you to change sizes in a matter of seconds. Its rugged design means that doors will always be clamped and squared accurately without need for RF curing or pinning of the joints. Each door clamp is equipped with one or two adjustable pneumatic cross clamp which pulls the frame towards the square and two or four quick adjusting pneumatic draw clamps that finish the squaring and clamping sequence. Air pressure can easily be regulated with each clamping cylinder having an average clamping force of 1600 lbs. The clamping sequence is activated by two hand push button safety control.

The squaring assemblies are available in a number of sizes, the most popular of which are listed below. The large frame unit allows either one large door frame to be clamped up to 2130 mm long, or by inserting the centre bar two smaller doors up to the maximum capacity can be clamped and squared at the same time.

JLT 'Buddy System' Combo Clamp
Specifically designed for workshops with limited space, the Buddy System Combo Clamp combines both the pneumatic Cabinet Door Clamp as described above with the Panel Clamp. Side one comprises of a the 2.4m Panel Clamp frame with 5 gluing levels and 18 clamp arms. This is designed for solid wood edge and face laminating. Mounted on side two and angled at 70 degrees for easy loading there is the pneumatic clamping and squaring assembly for cabinet doors and frames. Operation and setting is the same as the standard Door Clamp.

Specification
JLT Single Door Clamp with 660mm (26") wide x 1575 mm (62") long
maximum capacity

JLT Double Door Clamp with 965 mm (38") x 2130 mm (84")
maximum capacity with removable centre bar for either single or
double door clamping

The above units suitable for components up to 50 mm (2") in thickness

JLT 2.4m (8ft) Buddy System Combo Clamp equipped with 18 off 202 type clamp arms having 1020mm (40") max. opening and 64mm (2.5") high jaws. On the reverse side a pneumatic single door clamp is mounted with a max. working capacity of 660mm (26") wide x 1575mm (62") long.

JLT 3.6m (12ft) Buddy System Combo Clamp equipped with 30 off 202 type clamp arms having 1020 (40") max. opening and 64mm (2.5") high jaws. On the reverse side a pneumatic double door clamp is mounted with a max. working capacity of 965mm (38") wide x 2130mm (84") long.

JLT Entry Door Clamp 1220mm (48") wide x 3050mm (120") long x 50mm (2") thick. On request can be specified with removable centre bar.

Optional Equipment
Door Stile Spreader - for application of PVA glue on to the door stile

Please Quote Me

View My Quote List