, ,

Brochures:
Click here to view brochure	Click here to view brochure

Video:

Click here to view Movie

A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine can be equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Optional additional machining operations include producing a square corner hinge plate recess or lock face recess by means of the additional milling unit. The operator simply selects in the program if they want a radius or square corner and the machine does the rest. In addition the same milling head can be used to make the small pilot hole for hinge screws etc. There is also the possibility to produce a square end tenon, round end tenon or dovetail / dovetail slot when the special front table is fitted.

Specification
Axis capacity - X 2800mm, Y 180mm, Z 150mm.
(2400mm X capacity when optional drilling head fitted).
1 x ER32 collet for milling cutter 16mm max. dia.
Max working table dimensions - 3000x618mm
X axis positioning speed 35m/min.
Y axis / Z axis positioning speed 6m/min.
Retractable pneumatic positioning stops 2 off - on front of table
Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table.
Left hand side ref. stop.
Front table extension supports x 2
Router motor power 3.3kw.
Router motor RPM 0-18,000 rpm.
Touch screen controller - Elco Power 1000.
Dust extraction outlet x 1 80mm dia, 2 x 100mm dia
CE side and rear safety guards with front light curtain.

Optional Equipment
Drilling unit (For Anuba type hinges) 2400mm X axis capacity
Front side pneumatic clamp (max one off)
400MM Y axis stroke - increased Y / X axis speed 12/mt min
16mm dia lock case cutter. 150mm overall length,
Larger router motor HP 7.5 (kW 5.5) + Inverter
Additional front door support
ISO 30 quick change - pneumatic activation - tool system with 2 x cones and 1 collet - with std motor only
HSK40 quick change - mechanical - tool system with 2 x cones and 1 collet - with uprated motor only.
Addditional rear clamping unit
Table extension 700mm c/w with pneumatic stop
Table extension 1400mm c/w with pneumatic stop
Table extension 2100mm c/w with pneumatic stop
Front retractable table for end boring - complete with clamps
Spare HSK tool holder - each
Spare ISO 30 tool holder - each
Spare ER32 collet
Additional pneumatic retractable stop
Inclination of router head +/- 3 degrees.
Special table attatchment with adjustable angle fence / pneumatic clamps to give tenon / dovetail machining capability. (Special dovetail cutter extra at E380.00.)
Additional milling unit with square or rectangular recess lock / hinge slots. 3mm dia cutter / ER25 collet

Please Quote Me

View My Quote List