A new concept fully programmable single end tenoner which is faster to set up than any other tenoner on the market due to the simple Siemens controller. This controls both the saw (tenon length), top and bottom cutterheads for (tenon thickness and shoulder size) and also vertical / horizontal positioning of the scribe shaft all at the push of a button - No manual Setting required. Simply call your programme number up along with the job name required and all axis are set automatically at the push of a button.

Specification
Saw unit 4HP at 3000 rpm with 400mm dia. sawblade x 30mm bore. 125mm max. cutting height with lateral movement up to 150mm. Dust hood 120mm dia.
Tenoning heads top and bottom cutterblocks 150mm long x 160mm on 40mm dia. shaft each 3 HP at 5000 rpm
Horizontal movement of Top head 75mm - Bottom head zero
Vertical setting of top head 0/180mm, Bottom head 0 / 80mm
Max. tenon thickness 185mm.
3 x Dust hoods 140mm dia, 1 x 100mm.
Vertical head for Scribing tools - 40mm dia. shaft with 190mm useful working length 5.5 HP motor at 3600 rpm.
Vertical movement from 140mm
Horizontal movement 150mm
Maximum scribe diameter 320mm (optional 350mm dia)
Table size 400 x 600 mm equipped with aluminum fence 2800mm with 2 mechanical reference stops and swivelling +/- 45 degrees
Front table extension 410mm x 515mm
Fitted with two off pneumatic clamps as standard

Optional Equipment
Motorised tenoning carriage
Spindle length 400mm x 50mm dia - motorised movement
Circular saw dia - 450mm for cutting height of 150mm

Please Quote Me

View My Quote List