A robustly built range of upstroke crosscutting machines designed for programmable and repetitive cutting from lengths of standard or random length long timber. The saw unit has a pneumatic upstroke action and is fitted with a rack and pinion drive feeding system for fast and accurate positioning
Specification
Self braking motor 10hp
Saw blade diameter 500mm
Max cutting width (refer to chart) 360mm
Max cutting height (refer to chart) 135mm
Dust hoods 3 off dia 100mm
Air consumption per cycle 8 nl
Nett weight 400kg
Specification Pusher Unit Capacity 3000mm to 7000mm 99 programmable cutting cycles 15 programmable sizes per programme
Push system - Rack and pinion with brushless motor
Measuring system - electronic strip encoder
Positioning speed 100m/min
Pneumatic rising of the pusher at the end on the cutting and overhead return
Maximum clear loading length is 900mm less than infeed length specified above. Lengths up to the maximum length can be cut, but the timber must be slotted into the guard.
Optional Equipment | |
| Flooring option - including defecting camera, minimum length between defects, fixed length cutting between defects and totalling of linear meters production |
| Pneumatic side clamp |
Matrix 2 - Automatic measuring function of the timber length and automatic selection of the cutting cycles in the memory for that length. (Working length 900mm less than infeed table length) 'Step Down' optimisation of timber length based on pre entered cutting list of up to 100 sizes |
| Matrix 3 - Touch screen controller featuring full Optimizing software for max length, limited waste and priority length. Automatic merging of cutting lists, import from length. Automatic merging of cutting lists, import from Length. Automatic merging of cutting lists, import from Excel, remote programming. (Working length 900mm less that infeed table length). Transfer of data via USB |
| Matrix 4 - As Matrix 3 with the addition of a defecting camera for picking up chalk marked defects on pusher return |
| Outfeed table - extra per meter |
| Label printer ( Matrix 3 + 4 Only ) |
| Extra TCT blade - diameter 500mm |
| Automatic loading system ( 5000mm capacity ) |
| Ink jet printer for in line printing - two lines |
| Upgrade saw unit to TR600 Hydraulic saw unit with 600mm blade |
| Electronic sorter, with 2m outfeed belt and 2 kickers |
| Additional meter of outfeed belt |
| Additional electronic kicker |
| Loading system with infeed plates for last 500mm only. For 7000mm |
| Ethernet port for remote downloading of cutting lists (USB option not available on Matrix 1 / 2) |
| Electronic waste trap door |
| Windows operating system (Matrix 3 / 4 only) |
| Ink jet printer - one line printing |