JJSmith / Boere BKKK / TKKK 1300 Top and Bottom Sanding Line. 1995. CE

Image of Boere BKKK / TKKK 1300 Top and Bottom Sanding Line. 1995. CE

Boere Elite BKKK1300

Bottom Working, equipped with 3 contact rollers.
Sanding width                           1300mm
Sanding Height                            150mm
Configuration

1st Contact Roller x 90 shore x 40hp
2nd Contact Roller x 80 shore x 25hp
3rd Contact Roller x 60 shore x 25hp
Brush Motor                              0.75HP
Height Adjustment Motor            0.33HP
Feed Motor                                3HP
Feed Speed                               5-25m/min

Specification

Bo-Track electronic Tracking
Protection against sanding belt running off
Pneumatic sanding belt tension
The sanding belts may only start if sanding belts have been tensioned
Automatic brake device on the sanding units
Dial gauge for accurate setting of contact rollers
Built in rotating fibre brush
Feed by means of a conveyor belt
"Air Cushion" laminated table for constant sanding pressure.
Fine adjustment of the laminate table,
Electromotive adjustment of the feed table.
Long conveyor belt in-feed
Electronic digital counter with accuracy of 0.1mm
Quick reversal of solid to veneer setting.
Limit switches for protection of highest and lowest table position.
Pressure control switch for switching off machine when insufficient pressure.
Lockable main switch.
Adjustable control panel.
Central exhaust hood with opening of 400mm
Protective finger guard.
Thickness protection
E-stop front and rear.
Working hours counter
Thermal protection overload of all motors.
Automatic star delta motor starters
Ammeters to indicate load on motors.
Air jet cleaning devices
Feed speed adjusted by means of inverter with electronic read out.
Vacuum table
Turret stops for adjustment of contact rollers
Rubber pressure rollers.
Indeed and outfeed rollers

Boere Elite TKKK1300
Top Working, equipped with 3 contact rollers.
Sanding width                           1300mm
Sanding Height                            150mm
Configuration

1st Contact Roller x 90 shore x 40hp
2nd Contact Roller x 80 shore x 25hp
3rd Contact Roller x 60 shore x 25hp
Brush Motor                              0.75HP
Height Adjustment Motor            0.33HP
Feed Motor                                3HP
Feed Speed                               5-25m/min

Specification

Bo-Track electronic Tracking
Protection against sanding belt running off
Pneumatic sanding belt tension
The sanding belts may only start if sanding belts have been tensioned
Automatic brake device on the sanding units
Dial gauge for accurate setting of contact rollers
Built in rotating fibre brush
Feed by means of a conveyor belt
"Air Cushion" laminated table for constant sanding pressure.
Fine adjustment of the laminate table,
Electromotive adjustment of the feed table.
Long conveyor belt in-feed
Electronic digital counter with accuracy of 0.1mm
Quick reversal of solid to veneer setting.
Limit switches for protection of highest and lowest table position.
Pressure control switch for switching off machine when insufficient pressure.
Lockable main switch.
Adjustable control panel.
Central exhaust hood with opening of 400mm
Protective finger guard.
Thickness protection
E-stop front and rear.
Working hours counter
Thermal protection overload of all motors.
Automatic star delta motor starters
Ammeters to indicate load on motors.

Feed speed adjusted by means of inverter with electronic read out.
Vacuum table

Overall floor area approx 9m long x 2.5m wide

More Photos...