JJSmith / Weeke BHC360 CNC Machining Centre with ATC. 2007. CE

Image of Weeke BHC360 CNC Machining Centre with ATC. 2007. CE

Positioning range - x axis 5860mm, y axis 1822mm
Supporting table - 5250mm x 1250mm
Speeds x axis 60m/min, y axis 50m/min, z axis 20m/min

9kw air cooled router head to accept HSK63 toolholders. 1,250 - 24,000rpm

K Table basic equipment including :
10 x Panel supports [ extended to 1300mm ]
8 x Rear and 6 x front stops
4 x Feeding rails for positioning of heavy workpieces
2 x Pneumatically lowerable side stop fences for left and right hand working fields
LED positioining system for panel supports and vacuum cups [all programmed into woodwop ]
Vacuum pump 250 m3/hr
Automatic programme controlled centralised lubrication
Aggregate interface main spindle 360 degree axis [ c axis ] to allow horizontal mortising / recessing etc
TC14 Rear mounted toolchanger for 14 tools [ max tool weight 5kg incl HSK toolholder ]
Woodwop DXF Professional software

Free standing control panel with :
Powercontrol system with PC and 17inch TFT graphic monitor. Windows XP
Min 2GHz and 512MByte RAM, 1x hard disk with min 40 Gbyte HDD
Diskette drive
CD ROM drive
USB connection
Woodwop programming system, teleservice modem etc

Including safety pressure mats and perimeter fencing.
Good selection of hsk tooholders, vacuum cups, and 2 aggregates [ 1 x cam box router for horizontal mortising and 1 x 4 way routing / drilling ]

Serial nr - 0 -250 - 12 - 1998
Year - 2007 CE Compliant
Condtion - Excellent [ less than 5000 recorded hours.]
Overall floor area 7.8m wide x 4.1m deep

More Photos...