The V235 NC is a high speed precision mitre saw for the picture frame, joinery and furniture industries. It is fitted with an on board computer enabling it to operate in various cutting modes. The machine is able to cut from random lengths of material and can also optimize the cutting sequence in its list mode.
The computer is fitted with an 8 inch visual display unit which allows the data that the operator requires to be constantly displayed. Programs can be written and edited on the machine or can be downloaded from an office PC via a 3.5 floppy disc. It is possible to interrupt the cutting process at any time and have a different program carried out whilst all the data relating to the first program remains stored. Error messages are displayed on screen reducing downtime.
The machine is fitted with a choice of either a 3000mm capacity vertical hopper feed system or a 3000mm horizontal feed system, an outfeed conveyor belt with a pneumatic sequence kicker is also fitted as standard in order not to damage the cut components and to separate the tail end waste pieces.
Specification
Twin blade cutting station with 3 hp motor
2 x 350mm diameter TCT sawblades
85mm cutting width capacity
Pneumatic blade stroke with speed adjustment
Vertical or Horizontal feed magazine 3000mm capacity
Outfeed conveyor with photocell and kicker
Optional Equipment | |
| Vertical feed increased to 4000mm capacity ( in lieu of standard ) |
| Vertical feed increased to 5000mm capacity ( in lieu of standard ) |
| Vertical feed increased to 6000mm capacity ( in lieu of standard ) |
| Horizontal Feed increased to 4000mm capacity ( in lieu of standard ) |
| Horizontal feed increased to 5000mm capacity ( in lieu of standard ) |
| Horizontal feed increased to 6000mm capacity ( in lieu of standard ) |
| Extra transfer arm for Vertical feed |
| Extra transfer arm for horizontal feed |
| Pneumatic transfer belt 2000 x 600mm |
| Unloading belt with kicker 2000mm ( in lieu of standard belt ) |
| Unloading belt with 3 x kickers 3000mm ( in lieu of standard belt ) |
| Device for loading short infeed pieces ( min 900mm ) |
| Extra for cutting aluminium |
| Increased cutting width to 97mm ( 350mm blade ) |