A high quality,high specification German built spindle moulder with easy to execute 4 axis programming for the rise and fall, tilt +/- 45 degrees, position of complete fence assembly, position of single fence. It is possible to memorise 999 programs. The programming control unit is mounted in an overhead panel that is tilting and extendable. The tilting aggregate is supported on both sides in solid segment guides. The table is is strong ribbed cast iron with rotating table rings. As standard the machine is equipped with a 15hp motor, 'quick change' HSK spindle system that requires no pneumatic locking and automatic clamping of the fence assembly to the machine table
-
Specification
4 axis electronic positioning
- H axis - vertical setting
- S axis - tilt setting
- G axis - complete fence assembly
- T axis - single fence plate
- 999 freely programmable programs
Digital LED display for:
- Axial spindle position (absolute measurement)
- Vertical spindle stroke (incremental measure)
- Display of degrees for tilt setting
- Spindle speed.
Tilting of spindle +/- 45 degrees
Eronomical machine dimensions
15 hp main motor (Automatic wear resistant braking)
Table size 1300 x 800mm
Table height 870mm
Vertical setting of spindle 150mm
Spindle dia 11/4" (HSK 80)
Support arm on table table 1340mm long extendable to 970mm in front
Automatic calibration of display for tilt setting
Spindle reverse switch with locking device
Shaper fence with cast iron fence plates having comfort clamping
Gamma V type 'shaw' guard assembly
Type 1639 shaper fence for curved workpieces
Zeromaster adjusting device for reference measure of spindle height (including holder)
CE approved.
GS dust approved.
Optional Equipment | |
| Comfort support arm for feeder - vertically adj. via electric motor - positioning thro' axis module |
| 4 wheel 8 speed feed unit (Customers own feed can be fitted - please specify model type) |
| Comfort device for pivoting aside / lifting of the fence assembly via electric motor |
| Safety bar system (5 pieces) to fit between shaper fences |
| Swing away of shaper fence via hydraulic lifting up/down |
| Additional HSK 80 11/4" dia spindle x 140mm long |
| Additional HSK 80 30mm dia spindle x 140mm long |
| Additional HSK 80 40mm dia spindle x 160mm long |
| Collet stub type spindle for HSK (for router type cutters) with nut and hook wrench |
| Collet to suit 3 to 20mm dia. Each |
| Working hour meter with 2 x LED displays |
| 2500mm table extension with front support bar |
| Centrex type 1624 'shaws' guard type protection |
| Integral fence plates 500mm /500mm (Aigner type - in lieu of standard) |
| Integral fence plates 650mm/650mm (Aigner type - in lieu of standard) |
| Sliding table with fence support and eccentric clamping device complete with guard. Ext dia 120mm |
| Bracket for pivoting feeder aside (when sliding table fitted) |
| Electronic variable speed selection 1500 - 10,000 rpm thro' 7.5kw motor |