Click here to view brochure	Click here to view photo

Heavy duty double sided template shaper with hydraulically controlled feeding system, with a working feed speed of up to 18 m/min.

4 Working units (2 RH + 2 LH) - without tools

Unit 1-2 Motors 10hp each with rotation reverse switch
2 Cutterholders type E with 35mm dia. shafts for cutters max. 160 x 180mm

Unit 3-4 Two speed motors 4.5/6hp each
2 Cutter holder type I with dia. 35mm shaft for profile cutters,
max. dia. 160 x 180mm and rubber rollers for oscillating belt sanding.

Manual and automatic slowing down of feed speed, centring device of workpiece on template, mechanical digital readouts for the tracer point position on the template and vertical tool adjustment.

Specification
CP100/4-2500 max. working length 2500mm
6 Tiltable non-rotating clamping cylinders
Including CE Mandatory safety equipment

Optional Equipment
2 x Z18 cutterblocks 100 dia. x 180mm with TCT disposable cutters
2 x Spiral cutterblocks 100 dia. x 180mm with TCT brazed-welded cutters
Head reopening device to use 2 templates when working on pieces with round end
Extra clamping cylinder
Double acting clamp cylinders instead of standard
Extra double acting clamping cylinder
Auto timed carriage lubrication, spindle brake release for cutter setup
Preparation for the use of profile sanding discs max 200mm dia
High speed carriage return 100m/min through 7.Kw hydraulic pump

Please Quote Me

View My Quote List