Click here to view photo

A simple to program semi automatic hydraulic swing chisel mortiser that eliminates the need for manual marking out. Programs are created by entering the component length along with the position, length and depth of the mortise slots/s. The machine can memorise upto 99 different working programs. Creating and inputting an individual program only takes a couple of minutes. The machine start working cycle is via two hand push button safety control which activates the clamping, table movement and start / stop of the mortising head. The table movement speed (in / out) can be individually regulated. As standard the machine is equipped with a total of 12 pre-set mechanical workpiece stops mounted on the table and left / right aluminium table extensions. On request the stops can be pneumatic operation and programmed through the machine controller. Thanks to the electronic control and table traverse via precision re-circulating ball and screw it is possible to achieve a high degree of repeat accuracy in relation to the mortise position, length and depth. Also the mortise slot itself is very clean.

Specification
Motor 3hp
Max. mortise depth 110mm
Max. mortise slot length with single stroke 100mm
Min. mortise slot width 6mm
Min. mortise length 25mm
Max. workpiece height 145mm
Max. workpiece width 170mm
Vertical stroke of head 90mm
Table transversal stroke 120mm
Table longitudinal stroke models 400mm
Two of aluminium table extensions - each 1600mm long.
Worktable dimensions 240 x 950mm
Dust outlet x 2 60/80mm

Optional Equipment
12 off automatic pneumatic workpiece stops activated through the program (instead of std mech.stops)
2 x additional pneumatic stops
Mortise chisels (Price on request)
2 x additional mechanical stops with longer tables
All stops on right side with stand and extra horizontal cylinder

Please Quote Me

View My Quote List