Click here to view photo

A substantially built machine designed with ease of use and quickness of set-up in mind. Ideal for the general woodturner, furniture or joinery manufacturer who require a versatile lathe that can be used for long and short production runs alike. The TA Winner uses a hydraulic automatic self centering system comprising of a drive cup and steady rest for accurate high speed loading of components upto 100mm sq. As the device is activated by a foot pedal control, the operator is left with both hands free to load the component. For sections larger than 100mm sq. a set of special detachable vee blocks are used to centre the component with micro-metric adjustment for altering the height setting. At the end of the cutting cycle the turning is hydraulically ejected. These new feature eliminate the time consuming job of marking out or "pointing" the component for accurate centering prior to turning.COMPLETE WITH AUTOMATIC HOPPER FEED AND UNLOADING DEVICE.As standard the machine is fitted with 2 independent, sensitive Duplomatic copy units that can work from a sample or template. An additional 3.5mm radius pre-cut tool is mounted before the steady. The tool saddle runs on high resistance, hardened and replaceable slideways. The movement is via a precision re-circulating ball and screw drive for maximum accuracy, thus ensuring high quality and definition of the turned component. Tool saddle speeds can be programmed and memorised by the EM19 controller. This unit also controls the sequencing of the automatic hopper feed and unloading device which allows for continuous, uninterrupted production. The optional hydraulic dowel knife units can also be automatically sequenced into the cutting cycle through the EM19 unit. All machine controls are housed in a swinging arm panel which allows the operator to choose his favoured working position.

Specification
Automatic hopper feed and unloading device (max 2m long).
1600mm or 2000mm turning capacity between centres
Two speed 6/7.5hp motor giving eight spindle speeds
600-900-1200-1500-1800-2250-3000-4500rpm
Two Hydraulic Copy Units
Max 100mm x 100mm square section with revolving Steady
Max 175mm x 175mm square section without Steady
3 workpiece centreing cups
1 Revolving steady c/w precutting knife dia. 140mm
1 Revolving steady dia. 90mm
Parallel turning tool with V gouges 3.5mm radius
2 Ball bearing centres 20 and 48mm dia.
2 Four jaw driving centres 20 and 45mm dia.
2 'V' type Tantung gouges with 0.6mm and 3.5mm radius
2 extraction hoods each 100mm dia
Sliding guard for operator protection
Double pass device on both hydraulic copiers
Detachable pair of V blocks with micrometric adjustment for self
centering of components for section 100 x 100mm or larger
CE safety equipment

Optional Equipment
AG125 bench mounted tool grinder with 2 x diamond grind wheels
10HP variable speed spindle motor (via EM22 control)
Hydraulic and programmable R/H or L/H vertical dowel knife unit - each
Cobalt gouge, 0.6,1.25, 3.5mm radius - each
Tantung gouge, 0.6,1.25,3.5mm radius - each
Additional diamond grind wheel - specify radius (to match gouge)
Spare steady bush

Please Quote Me

View My Quote List