A substantially built machine designed for the workshop that may require continuous production of a particular product, but still require the versatility of a machine that is easy to set and operate. This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped as standard with hydraulic controllable advance of the tool saddle, hydraulic semi automatic centreing device, hydraulic tailstock unit and manually operated back knives (with optional hydraulic control
Specification
1600mm turning capacity between centres
Hydraulic control to saddle movement with manual speed control 0 to 6m/min
Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm
Two Hydraulic Copy Units
2 Vertical back slides with knives for making dowel ends
Max 95mm x 95mm square section with revolving Steady
Max 175mm x 175mm square section without Steady
Standard rings for two steadys - sizes to be specified
45mm/26mm driving centre for Headstock
12mm centre for Tailstock
2 'V' type Cobalt gouges with 0.6mm and 3.5mm radius
1 Precutting tool for sizing fully round workpieces
1 Steady mounted precutting tool
2 extraction hoods each 100mm dia
Sliding guard for operator protection
CE Safety guarding
Optional Equipment | |
| AG 125 tool grinding machine for V gouges bench mounted including 2 x diamond grind wheels |
| Diamond wheels 125mm dia with radius 0.6mm 1.25mm 3.5mm |
| Double Pass device on roughing copier |
| Additional manual vertical saddle |
| Hydraulic control on vertical slides - each |
| Additional / spare dowel knife -25mm wide |
| Special steady for bent pieces |
| Self Centering steady for square pieces (30x30 to 60x60) |
| Self Centering steady for square pieces (60x60 to 90x90) |
| Bushes for fixed and revolving steady (please specify dia) |
| 4 jaw driving centre 20mm dia |
| 6 jaw reinforced driving centre 50mm dia |
| 4 jaw reinforced driving centre 45mm dia |
| Reinforced ballbearing centre 48mm dia |
| Cobalt gouge (Radius 0.6mm, 1.25mm, 3.5mm please specify) |
| Tantung gouge (Radius 0.6mm, 1.25mm, 3.5mm please specify) |
| Parallel turning tool |
| Precutting insert knife TCT |