A sawing center for processing panel material of chipboard,laminated and unlaminated materials of wood, compound material, synthetics and similar materials. The sawing center allows for for straight 90 degree cuts plus mitre cuts upto 45 degrees thanks to the tilting saw aggregate. In addition the saw can be equipped with optional angle cutting equipment for plus / minus 45 degrees cuts. When this works together with the tilting blade it is possible to make compound angle cuts. The automatic working sequence of the sawing center allows precise cutting of dimensions and angles. As an option rebates and grooves of different depths can be made along with the possibility to make cut outs or insert cuts with a controlled saw carriage. The saw carriage is supported on both sides of the machine frame on two hardened and ground round bars and 4 off concave ground rollers (horizontal 4 point guiding system). The tilting of the unit is equipped with two independant aggregates for the main blade and the scorer. The vertical setting is done by special guides in hardened and ground linear rails. Feed speed of the saw carriage is variable 0-40 mt/min with the return speed always at the maximum. The stroke of the saw carriage and the pre-selected height of cut is automatically controlled from the machines main control panel.The main saw blade dia is 350mm with a 7.5kw motor as standard. The scoring unit has a 1.1kw motor with 180mm max. blade dia. Horizontal and vertical setting of the scoring unit is done mechanically thro' adjusting screws. The setting procedure can easily be done from outside the machine with a special key. Both saws have the APA quick clamping system. The pressure beam is guided on both sides through toothed racks. The pusher fence is equipped with automatic clamps that can be adjusted in two levels from the machines switch panel. The drive of the pusher is by 2 x toothed racks. The main machine controller is an industrial PC, Windows XP embededded, 17" TFT monitor with compact flashcard 1gb.Complete with keyboard and mouse. As standard with manual production input on request PIOS prof. optimisation software. It is also possible to connect the machine to a local network

Specification
Cutting range X axis 3200 or 4200mm
Cutting ranges Y axis 3200mm 0r 4200mm
Cutting height at 90 degrees 60mm
Cutting height at 45 degrees 40mm
Blade projection at 90 degrees 70mm
Main motor power 14kw
Main saw blade speed 4400 rpm
Main sawblade dia 350mm
Scoring saw motor 1.1kw
Scoring saw speed 6900 rpm
Scoring blade dia 180mm
Mitre angle 0-45 degrees.
Angle cutting feature plus/minus 45 degrees
Clamping units - 5 off 3200mm / 6 off 4200mm
Support bars with synthetic rollers 6 off 3200mm / 7 off 4200
Side pressure device - variable 50 -1000mm
Advance of saw carriage variable 0-80 mt/min
Advance of pusher fence 0-25 mt/min. Return speed 100 mt/min
3 x air cusion tables tables 1800mm x 600mm
Adj.of cutting length od main saw
Adj. of cutting height of main saw - 4 levels

Optional Equipment
Controlled saw carriage movement for cut outs for slots, vision panels etc
Variable speed reg. of sawblade
Equipment for angle cutting WSA on front table, automatic positioning of the angle table +/- 47 degrees incl. software,.
Size cutting feature thro 3 switching trim fingers
Program for making cut outs with controlled saw carriage movement for making glass cuts / ventilation slots etc
Grooving program for creation of grooves,inserted grooves, rebates in single and serial with steps
Printer for labels - barcode and graphics printing including console and software
CD ROM drive
Additional clamping unit
Main sawblade 350x4.4xx 30mm Z72
Scoring blade 180x4,55 x 30mm Z30 alternate bevel
Pressure reducer for clamping units.
PIOS 'Professional' optimisation software - machine version
PIOS office version - one licence
15" touch screen controller with software.

Please Quote Me

View My Quote List