INNOVATIVE WOODWORKING MACHINERY & EXPERTISE

Leadermac LMC523S 5 head planer moulder

About this Product

A heavy duty, cast iron construction, 5 head pre-straightening planer moulder that has a high standard specification. Features include chrome bed plates, driven bed rollers, full carden drive feed system, pneumatic pressures centralised lubrication system and electronic setting to front side head / top head and beam.

A heavy duty 5 head, through feed planing and moulding machine with pre-straightening table

Heavy duty

Cast iron frame

Quick set up

Specification

Capacities

Maximum size of timber admitted width 15 - 230 mm
Maximum size of timber admitted thickness 10 - 125 mm

Head Sequence & Motor Powers

First bottom 5.5 kw/7.5 hp
Fence side } 7.5 kw/10 hp
Near side }
Top 7.5 kw/10 hp
Second Bottom 7.5 kw/10hp

Cutting Circles

First bottom head 125 mm -160 mm maximum
Fence side head 112 mm -180 mm maximum
Near side head 112 mm -180 mm maximum
Top head 112 mm - 200 mm maximum
Second bottom head 112 mm - 200 mm maximum

Feed System

Maintenance free full cardan shaft drive to feedworks for balanced drive performance, with individual worm reduction gear box to each feed roller station

Feed roller diameter 140 mm

Infinitely variable feed speeds via inverter with LED readout 6 – 24 metres per minute

Feed motor power 3.0 kw/4.0 hp

Top infeed rollers before first bottom head with pneumatic rise and fall by switch

Intermediate top driven feed roller station with pneumatic loading for feeding minimum 200 mm length workpieces

Steel feed rollers up to top head are hardened and chromed to resist wear and to prevent chips sticking to them

Polyurethane feed rollers after top head

1 unit infeed powered serrated bed roller before first bottom head

1 unit powered outfeed driven bed roller

Pneumatic pressures to feed roller loading with 2 no pressure regulator controls

Powered rise and fall to feed beam with .75 kw/1 hp motor

All feed rollers and pressures move with top beam rise and fall, including safety switches at extreme points

Inch forward and reverse to feed with duplicate control at top head position for fast and easy setting
Features

- Siemens electro magnetically braked motors

 Edge reference straightening system

Double side pressure unit opposite fence side head moving with near side head

Adjustable side guides after near side head

Spring loaded chipbreaker to top head with vertical screw adjustment and mechanical digital readout

Pad pressure after top head with vertical screw adjustment and mechanical digital readout

2000 mm pre-straightening infeed table with fence each with10 mm adjustment

25 mm high fences

40 mm diameter spindles belt driven, with spindle speed of 6000 rpm

All spindles have horizontal and vertical adjustment, with mechanical digital readouts for fast and accurate setting, except first bottom head which has vertical only

High precision spindle units
- All bed plates and fences have 0.3mm hardened chrome HRC at 60o
- Manual bed lubrication system
- One piece cast iron heavy duty main frame with optimum vibration absorption
- Centralised lubrication system to all main slides
- Safety interlock at infeed to prevent feeding oversized material
- Lift up sound and safety enclosure with gas struts, including internal lighting and safety interlocks, with noise absorbing material and rear access panel with interlock

Thin side guides after near side head
- Independent locking to all spindle adjustments
- Main electrical control panel with clearly marked and in your field of vision, remote control for setting positioned by top spindle
- Timed interlock to lift up enclosure
- Dust hoods 125mm dia oulet size.

 Toolkit
- Instruction and maintenance manual, electrical diagram and parts list.
- Machine supplied with electrics arranged 3/50/415 v
- Machine conforms to CE specification

Options Included

ATS Electronic positioning by keypad control and motorised adjustment to near side spindle horizontal movement with dual LED measurement display for tool compenstation to give radius and actual cutting sizes. Type REC-705B

ATS Electronic positioning by keypad control and motorised adjustment to top spindle vertical movement with LED measurement display for tool compensation to give radius and actual cutting sizes . Type REC 705B. Additional readout TYPE REC 720 positioned at first top head.

Toolings

2 no 230 mm long 4 knife circular planing Centrolock cutterblocks complete with quick change HSS knives

2 no 125 mm long 4 knife circular planing Centrolock cutterblocks complete with quick change HSS knives

1 no TCT Centrolock edge reference cutter

Options
Downloads
MBA Banner Background
Mba Logo New

Modular Building Automation

Factory built timber frame systems for the 21st century

JJ Smith Logo

Visit us at FC Expo 24!

Experience the future of woodworking at stand 73 at this year’s Furniture Component Expo with robotics and automation demonstrations from Woodworking Robotics.

Click below to register your place!

Register Now

The website uses cookies.

Some are used for statistical purposes and others are set up by third party services. By clicking 'Accept all & close', you accept the use of cookies. For more information on how we use and manage cookies, please read our Cookie Policy.