INNOVATIVE WOODWORKING MACHINERY & EXPERTISE
A high-quality heavy duty automatic squaring and nailing station for timber frame panel wall manufacturing. The panel is held square and secure during the assembly and nailing of the studs and components. The operator is able to manually position the components for the panel at a safe and comfortable working position in the centre of the panel, enabling the machine to be used with a single operator.
The position of the studs and sub-components are determined by the automatic positioning of the locating arms, the panel being assembled in a step by step process. The positioning of the nail guns, the number of nails to be fired in each stud and the locating arms are all controlled by the on board CNC control unit.
All the necessary processing information for the machine is taken from the drawing software via our interface. This interface can be used to schedule the required panel manufacturing sequence by the production controller, eliminating any operator input. The panel drawing is constantly displayed on the screen whilst the assembly of the panel is taking place, with the relevant component highlighted. Full control of the drawing, including zoom and pan functions available.
The operator can manually override the automatic sequence at any time to enable single sided nailing of twisted timber and can open and close the tables to insert difficult sub frames and then return to the automatic sequence.
A fully automatic timber frame assembly machine
One man operation
Complete integration with design packages
Automatic squaring for a high-quality pane
A high-quality heavy duty automatic squaring and nailing station for timber frame panel wall manufacturing. The panel is held square and secure during the assembly and nailing of the studs and components. The operator is able to manually position the components for the panel at a safe and comfortable working position in the centre of the panel, enabling the machine to be used with a single operator.
The position of the studs and sub-components are determined by the automatic positioning of the locating arms, the panel being assembled in a step by step process. The positioning of the nail guns, the number of nails to be fired in each stud and the locating arms are all controlled by the on board CNC control unit.
All the necessary processing information for the machine is taken from the drawing software via our interface. This interface can be used to schedule the required panel manufacturing sequence by the production controller, eliminating any operator input. The panel drawing is constantly displayed on the screen whilst the assembly of the panel is taking place, with the relevant component highlighted. Full control of the drawing, including zoom and pan functions available.
The operator can manually override the automatic sequence at any time to enable single sided nailing of twisted timber and can open and close the tables to insert difficult sub frames and then return to the automatic sequence.
Full PC control with 17” touch screen
Interactive display of framing for panel assembly
Automatic download from drawing software
Heavy-duty tables with one fixed side and one moving side
90 degree squaring corner blocks with pneumatic retraction to enable
panel to move to next position when finished
1300mm minimum panel height
Maximum panel height 5m
Maximum panel length 6m – optionally up to 13m
400mm wide heavy duty work tables
825mm working height
300mm maximum panel thickness
Motorised table opening with automatic brake locking
Independent pneumatic retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel
Framing tools driven to the required position via a servo drive motor, with heights controlled by software
Full integration with major software packages including Sema, Dietrich's, HsbSoft, CADWORKS, Gang Nail, DDS & Mitek.
Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position.
Price excludes nailing tools
Visit us at FC Expo 24!
Experience the future of woodworking at stand 73 at this year’s Furniture Component Expo with robotics and automation demonstrations from Woodworking Robotics.
Click below to register your place!
The website uses cookies.
Some are used for statistical purposes and others are set up by third party services. By clicking 'Accept all & close', you accept the use of cookies. For more information on how we use and manage cookies, please read our Cookie Policy.
+44 (0)151 548 9000 
